HX-M/F Series Vertical Curing Oven-广东华芯设备有限公司

HX-M/F Series Vertical Curing Oven

This equipment is the vertical curing oven for semiconductor and SMT, turns horizontal heating to vertical one, with the advantages of saving energy, space.

The equipment adopts embedded system, which is different from ordinary touch screen and industrial computer, not only stable & reliable, but also more convenient for communication interface.

Double temp. design, not only realize dual-temperature zone heating, but also one zone for heating and one for cooling.

The machine adopts a unique horizontal + up & down air, different from the traditional air module, can effectively prevent uneven hot air due to too many products.

Heating system adopts 3-level protection to effectively prevent overtemperature and damage to the product.

Machine is 10,000-level clean design, can be applied to any clean place.

Heating adopts intelligent PID fuzzy operation, heat compensation ability is stronger, lower energy consumption.

联系我们

设备型号 Models	HXM/F-300	HXM/F-400	HXM/F-600
设备尺寸(mm) Dimension (mm)	L1800D1550H2200	L2000D1550H2200	L2200D1550H2200
机器重量 Weight	APPROX:1500KG	APPROX:1600KG	APPROX:1800KG
治具尺寸(mm) Pallet size(mm)	L300D250H25	L400D350H25	L600D500H25
加热区数量 Number of heating zones	4个温区（上2个，下2个） Top 2/bottom 2	4个温区（上2个，下2个） Top 2/bottom 2	4个温区（上2个，下2个） Top 2/bottom 2
排风要求 Exhaust requirements	5m³/H	5m³/H	5m³/H
电源要求 Power requirements	3P 380V/220V 480 50/60Hz
总功率 Total power	25KW	30KW	35KW
消耗功率 Power consumption	5KW	6KW	7KW
热风调速 Hot air speed regulation	变频调速 Inverter speed regulation	变频调速 Inverter speed regulation	变频调速 Inverter speed regulation
升温时间 Heating time	APPROX:15-30min	APPROX:15-30min	APPROX:15-30min
固化温度 Curing temperature	≤200℃	≤200℃	≤200℃
温度控制方式 Temperature control mode	PID闭环控制+高频脉冲	PID闭环控制+高频脉冲	PID闭环控制+高频脉冲
温度控制精度 Temperature control accuracy	±1.0℃	±1.0℃	±1.0℃
加热区温差 Temperature difference in heating zone	±2.0℃	±2.0℃	±2.0℃
炉子表面温度 Oven surface temperature	≤50℃	≤50℃	≤50℃
参数储存 Parameter storage	可存多种生产设置参数 A variety of production parameters can be stored	可存多种生产设置参数 A variety of production parameters can be stored	可存多种生产设置参数 A variety of production parameters can be stored
单层链条承受能力 Single-layer chain bearing capacity	5KG	5KG	5KG
整机承受能力 tde bearing capacity of whole machine	250KG	250KG	250KG
运输方向 Conveyor direction	标准左至右 Standard left to right	标准左至右 Standard left to right	标准左至右 Standard left to right
治具托边 Pallet support edge	≥5mm	≥5mm	≥5mm
信号接口 Standard SMEMA	前机要板/后机出板	前机要板/后机出板	前机要板/后机出板
运输马达 Transport motors	伺服/步进马达 Servo/stepper motors	伺服/步进马达 Servo/stepper motors	伺服/步进马达 Servo/stepper motors
推板马达 Board pushing motor	步进马达 Stepper motor	步进马达 Stepper motor	步进马达 Stepper motor
入/出板高度(mm) Conveyor height(mm)	900±20	900±20	900±20
生产效率 Production efficiency	60m/min/烘烤时间(min) × 存板层数
存板层次 Number of layers	25mm(64 layers)	50mm(32 layers)	75mm(16 layers)
烘烤时间 Bake time	8min-10000min可设定 8min-10000min can be set	8min-10000min可设定 8min-10000min can be set	8min-10000min可设定 8min-10000min can be set

注：此技术参数仅供参考，实际参数以厂家提供技术规格书及生产工艺而设定。
M:代表轨道可调，F:代表轨道固定
Remarks: above parameters are for reference only. tde actual parameter is set according to tde technical specification and production process provided by tde manufacturer.
M stands for adjustable rail; F stands for fixed rail.

返回列表